Guidelines For Cleaning Your Elevators Properly
1.Elevator finishes and maintenance
Elevator cab entrances and fittings are finished in a wide range of designs and materials chosen not only for their appealing appearance, but also for their ease of maintenance.
Finishes must be properly maintained in order to retain their appearance, withstand the heavy wear inflicted by the riding public, and provide the aesthetic expected by passengers.
2.Cleaning and maintaining stainless steel
The stainless steel-coated cab panels and its mirror finish contribute to the elevator’s elegance and refinement. This finish, however, demands constant attention and care. The key to effective cleaning and maintenance is to use the right materials and processes, as well as to apply them with care.
The following are the best stainless steel protection methods:
Use light spraying of stainless cleaner and a soft rag. Do not use bleach products to clean because it always leaves white looking swirls.
Buff with a soft, clean cloth in a vertical, not circular, motion.
REMOVAL OF SCRATCHES
Only specialists should remove scratches.
WAXING AND OILING ON-SITE PROTECTION
To avoid fingerprints on non-lacquered stainless-steel finishes, apply a light coat of silicone or furniture wax.
3. The significance of elevator cleaning orientation
When cleaning your elevator, pay close attention to the directions. Never move in a circular or horizontal motion; always go from top to bottom.
A vertical finish design is used on several elevator vehicle panels. To avoid undesired stains and scratches, stainless steel should be cleaned in the same direction as the original sanding.
4. Cleaning the wall fabric
Weekly cleaning with a soft cloth and periodic cleaning with warm water and a mild soap are usually enough to remove surface dust and dirt. A soft bristle brush is suitable for tough regions such as fingerprints, smudges, and so on.
When used as directed, most liquid cleansers and detergents on the market today are safe and effective. However, rinsing with a clean, moist towel is advised to ensure that no residue is left in the fabric. Abrasive cleaners should not be used since they can mark or dull materials. The use of a flammable cleaner may render the flame tests required for A17.1 code compliance null and void.
5. Examine the package label
There are numerous cleaning products available on the market. You must use the proper cleaning chemicals for the surface you are cleaning for the greatest results. Read the label to determine if it is appropriate for the surface in question. Finally, when utilizing cleaning chemicals, remember to safeguard your hands and eyes.
A clean elevator is usually a sign of a well-maintained elevator. While the outward sections of the elevator allow users to observe how the equipment is cleaned and examined, maintenance goes well beyond that.